Impact Pulveriser

Cambia Idioma a Espaρol

Features:
- Suitable for medium fine and fine size reduction of Minerals, Ochre, Clay, food stuff, crude drugs, pharmaceutical products, brass, zinc, dross separation, a wide range of chemicals, pulses, dyes, pigments, tobacco, coconut shells, saw dust, charcoal, etc.
- Grinds anything and everything this is not wet or sticky
- Depending on the material and setting, the fineness of the finished product achieved between 60 mesh to 300 mesh
- Unlike an ordinary Hammer Mill, the Impact Pulveriser does not have screens, which may break, wear out or clog in the crushing chamber
- Our Impact Pulveriser combine grinding, classifying and conveying in one single unit.

Principles of Operation:
The Impact Pulveriser consists of an encased Rotor carrying swing hammers, whizzer classifier for fineness regulation and pressure gradient creator mounted on a solid shaft. Raw material to be pulverised enters the crushing chamber through the hopper and the automatic rotary feeder. The impact of the hammers on the feed material against the liner plates reduces it into fine powder. The ground material is carried towards the whizzer classifier for classification and the oversize particles are rejected by the classifier and returned to the crushing chamber for further grinding. The classified material is then conveyed into the Cyclone for collection and bagging. A dust collector is provided in the system for ensuring dustless operation and for no loss of ground powder.

Brief Specification:
Type:
Air Swept Impact Mill with Whizzer Classifier operation in closed circuit
Body: Solid Cast Iron, machined and aligned on a strong cast iron base with top covers bolted.
Feeder:
Automatic Rotary Feeder, gear driven from the main shaft with feed control mechanism
Crushing Chamber:
Lined with renewable solid cast iron breaker plates
Rotor:
Machined mild steel thick plates mounted on main shaft
Shaft:
Solid Alloy Steel
Classifier:
Mild Steel Whizzer Classifier with adjustable spider to control fineness of ground powder up to 300 mesh depending on the type of material being pulverised
Bearings:
Double row self-aligning ball bearings in cast iron housing with suitable grease cups for lubrication
Hammers:
Forged alloy steel, hard faced, with manganese steel electrodes and balanced.
Blower:
Paddle type with replaceable blades
Cyclone:
Mild Steel sheet fabricated
Dust Collector:
Top and Bottom halves of Mild Steel Sheet, to be interconnected by dust bags
Piping:
All interconnecting Mild Steel piping supplied with loose flanges to facilitate easy erection

Specifications:
Model  IP-15  IP-20  IP-25  IP-32  IP-42
Size  15"  20"  25"  32"  42"
Motor (HP)  7.5 to 15  20  25 to 40  50 to 60  100
‘V’ Pulley Diameter  4"  5"  8"  9"  9"
No. of Grooves and Section on ‘V’ Pulley  3 x ‘A’ section  5 x ‘B’ section  5 x ‘C’ section  7 x ‘C’ section  7 x ‘C’ section
Speed (RPM)  3000  2200  2000  1800  1600
Space Required  8’ x 7’ x 12’  10’ x 9’ x 14’  12’ x 9’ x 14’  19’ x 10’ x 18’  20’ x 20’ x 25’
Net / Gross Weight (kg.)   880 / 1250  1800 / 2300    7500 / 9300
Shipping Volume (m3)    5.0   9.5   45.0


Model: IP-32


Model: IP-32

Approximate Production Capacity: (Capacity in kgs. per hour for 150 to 200 mesh):
Material  IP-15  IP-20  IP-25  IP-32  IP-42
Coconut Shell, Saw Dust, Tobacco, etc.  10 - 15  20-25  35-40  45-50  100
Crude Drugs, Tamarind Seeds, etc.  15 - 20  30-35  60-65  100  250
Dry Ginger, Pepper, Turmeric, De-Oiled Cakes, etc.  40 - 50  75-100  175-200  350-450  750-900
Tapioca Chips, Starch, etc.  50-60  200-250  400-500  800-1000  1500-2000
Bauxite, Bentonite, Barytes, etc.  50  100  125  500  1000
Coal, Calcite, Red oxide, etc.  60  100  175  500  1350
China Clay, Fire Clay, Bricks, etc.  70  150  230  500  1120
Lime Stone, Fledspar, Dolomite, etc.  70  150  225  450  1350
Soap Stone, Gypsum, Steatite, etc.  75  150  250  500  1120
Ochre, Graphite, Asbestos, etc.  70  150  225  500  1370


Model: IP-42 with Optional Rotary Valve & Totally Enclosed Dust Collector instead of Standard Open Type Dust Collector

Standard Accessories: Electric Motor, Starter, ‘V’ belts and fittings, foundation bolts, Cotton dust bags and balloons, dust collector angles, flat belt, Asbestos rope, etc.
Optional Accessories: Rotary Valve, Totally Enclosed Vibrator Type Dust Collector instead of standard Open Type Manually Vibrated Dust Collector, Essential Set of Spares


Standard Open Type Manually Vibrated Dust Collector


Totally Enclosed Vibrator Type Dust Collector


VIDEO OF IMPACT PULVERIZER MODEL: IP-42


Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42. Fax: +9122-22041389
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

Home  Top

TO OUR PAGE ON AGRICULTURAL EQUIPMENT

Back   Next