Manek - machine tools accessories like machine vice, rotary table, sliding table, compound slide, surface plate, etc.

Milling Machine Vice - Plain Base

Jaw Size:	4"	6 1/4"	8"	10"	12"
Gross Weight (kgs):	15	35	58	110	155

Milling Machine Vice - Plain Base

Milling Machine Vice - Swivel Base

Jaw Size:	4"	6 1/4"	8"	10"	12"
Gross Weight (kgs):	20	48	70	155	208

Angular Machine Vice

Jaw Size	4"	5"	6"	8"
Gross Weight (kgs)	30	45	60	90

Angular Machine Vice

Rotary cum Compound Slide

Table Size	8"x 8"	10"x 10"	12"x 12"
Cross & Longitudinal sliding	5"	8"	8"
Total Height	7 1/2"	9 1/2"	9 1/2"
Degree movement	90	90	90
Gross Weight (kgs)	45	100	120

Compound Sliding Table

Table Size	8"x 8"	8"x 12"	12" x 12"	12" x 20"	16"x 16"
Total Height	4"	4 3/4"	4 3/8"	5 5/8"	5 5/8"
Cross / Longitudinal Sliding	5" / 5"	8" / 8"	8" / 8"	12" / 16"	12" / 12"
Tee Slots	1/2"	1/2"	1/2"	1/2"	1/2"
Wheel Calibration	0.001"	0.002"	0.002"	0.002"	0.002"
Degree	90	90	90	90	90
Gross Weight (kgs.)	25	40	50	120	130

Compound Sliding Table

Rotary Table - Indexing Type

Rotary Table - Universal Indexing Type

Table Dia.	6"	8"	10"	12"	15"	18"	20"	24"	28"	32"	36"
Horizontal Height	3 9/16"	3 1/2"	3 3/8"	4 7/8"	4 7/8"	5 1/4"	133 mm	152 mm	171 mm	178 mm	200 mm
Vertical Centre Height*	4 3/8"	6 3/8"	6 3/8"	8 5/8"	8 5/8"	12"	305 mm	--	--	--	--
Worm & Gear Ratio	1 : 72	1 : 72	1 : 72	1 : 120	1 : 120	1 : 120	1 : 120	1 : 120	1 : 120	1 : 120	1 : 120
Wheel Calibration	2 mts	2 mts	2 mts	1 mt	1 mt	1 mt	1 mt	1 mt	1 mt	1 mt	1 mt
Tee Slots	3/8" bolt	1/2" bolt	1/2" bolt	1/2" bolt	1/2" bolt	5/8" bolt	17 mm	17 mm	17 mm	20 mm	20 mm
Centre Bush Bore	MT 2	MT 2	MT 2	MT 2	MT 2	MT 3	MT 3	MT 3	MT 3	MT 3	MT 3
Centre Bush Dia.	--	--	--	--	--	--	100 mm	125 mm	125 mm	125 mm	150 mm
Gross Weight (kgs.)	22	33	40	80	95	210	215	460	520	580	820

* Note: Specification of Vertical Centre Height is for Plain type and Indexing type horizontal models only

Granite Surface Plates

Granite Surface Tables

Granite Surface Plates and Tables
- Used for Precision Gauging, Inspection, Layout and Marking Purposes
- Made from natural Indian Black Granite Stone, fine precision lapped to high standard of flatness
- Stress Relieved & Wear Resistant. Temperature changes have almost no influence on accuracy (Lowest temperature coefficient)
- Does not rust, no oiling, does not stain or discolour
- Non-reflecting characteristics minimize eye strain
- Fabricated Stands with leveling screws available on request. Overall working height of stand with plate and leveling screw - approximately 900 mm

Plate Size (in mm)	Accuracies in microns
Plate Size (in mm)	Grade I	Grade II	Grade III
300 x 300 x 50	3	5	10
400 x 400 x 50	3	6	12
400 x 630 x 80	4	8	16
630 x 630 x 80	5	9	18
1000 x 630 x 150	6	12	24
1000 x 1000 x 150	7	14	28
1000 x 1600 x 200	9	18	36
1000 x 2000 x 200	12	25	46

Cast Iron Surface Plates and Tables
- Made from Close Grained Cast Iron, having hardness of 170 - 220 BHN
- Stress releived either by natural ageing or by artificial seasoning in a seasoning furnace
- Surface plates finished by hand scrapping
- Errors in flatness over 100 mm distance does not exceed 0.005 mm (in Grade I) and 0.01 mm (in Grade II)
- Fabricated Stands with leveling screws available on request. Overall working height of stand with plate and leveling screw - approximately 900 mm

Plate Size (in mm)	Tolerance in flatness (microns)
Plate Size (in mm)	Grade I	Grade II
250 x 250	5	10
400 x 400	7.5	15
500 x 500	7.5	15
630 x 400	7.5	15
630 X 630	7.5	15
630 X 1000	10	20
1000 X 1000	12.5	25
1000 X 1600	17.5	35
1000 X 2000	20	40
1200 X 900	12.5	25
1200 X 1200	15	30
1200 X 1800	20	40

Cast Iron Surface Plates

Cast Iron Surface Tables

Maneklal and Sons (Exports)
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42. Fax: +9122-22041389
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

TO OUR PAGE ON MACHINE TOOLS