|
|
 |
-
Steel fabricated straight sided presses - Available in single point and two point geared, ungeared type - Available with Rolling Key (standard supply) or Pneumatic Clutch - 'H' shaped press frame provides extreme structural rigidity and uniform parallel deflection producing increased tool life - Heavy duty machine, forged with tensile steel crankshaft to ensure minimum deflection - Variable stroke can be changed in minutes to provide ideal stroke for specific operation |
|
Specifications: |
| Model: | PLP-25 | PLP-50 | PLP-75 | PLP-100 | PLP-150 | PLP-200 | PLP-250 | PLP-300 |
| Press Capacity (Tons): | 25 | 50 | 75 | 100 | 150 | 200 | 250 | 300 |
| Bolster Area (L.R. - F.B.) (mm): | 425 x 400 | 475 x 500 | 550 x 575 | 625 x 675 | 675 x 725 | 800 x 800 | 900 x 900 | 1000 x 1000 |
| Stroke Adjustable (mm): | 56 | 75 | 87 | 100 | 125 | 150 | 150 | 150 |
| Slide Adjustable (mm): | 25 | 25 | 32 | 32 | 32 | 50 | 50 | 50 |
| Bed to Ram bottom (mm): | 275 | 325 | 350 | 425 | 475 | 500 | 525 | 550 |
| Opening in Bed (mm): | 150 | 175 | 187 | 210 | 250 | 275 | 300 | 300 |
| Hole in Ram Punch Dia. (mm): | 28 | 31 | 37 | 43 | 50 | 68 | 75 | 75 |
| Strokes per minute: | 60 | 55 | 40 | 35 | 30 | 30 | 27 | 22 |
| Section of 'V' belts: | B | B | B | B | C | C | C | C |
| No. of 'V' belts: | 2 | 3 | 3 | 4 | 4 | 5 | 5 | 5 |
| Main Motor (HP): | 2 | 3 | 5 | 7.5 | 10 | 15 | 20 | 25 |
Standard Accessories: Electric motor, starter, guard to gears
and flywheel, rolling key clutch.
Optional Accessories: Pneumatic clutch in lieu of rolling key clutch.
|
|
Maneklal
and Sons (Exports) |
 |
|
TO OUR PAGE ON MACHINE TOOLS |
|
