Manual / Auto Stroking Horizontal Honing Machine

Cambia Idioma a Espańol

Application: These Machines are suitable for honing automotive components like Connecting Rods, Rocker Arms, Valve Guides, Brake Cylinders, Bushes and bearings, Gears, Sewing Machine Parts, Diesel Fuel Injection Components on Batch / Mass production basis.

Operation: The honing Cycle is Manual. The operator has to load the job on the tool and press the pedal. The honing tool will start rotating and the operator has to reciprocate the job manually. Continue the cycle till the desired size is achieved.


Manual Machine Model: 75 HM
Model: 75 HM
Honing Operation: Manual
Bore Diameter: 3 - 75 mm
Bore Length: 250 mm
Spindle Speed: 250 - 1000 RPM (infinitely Variable)
Reciprocation Speed: Manual
Drive Motor: 0.5 HP
Reciprocation Motor: Does not exist
Coolant Pump: 0.1 HP
Coolant Tank Capacity: 50 Litres
Filtration: 3 Stage: Magnetic, Paper Filter and Gravity
Stone Expansion: Manually through feed wheel with indication on dial
Stone Pressure: Manually Adjustable
Process Timer: Does not exist
Stroke Counter: Does not exist
Net / Gross Weight (kgs): 500 / 650
Overall Dimensions (m): 0.85 x 1.2 x 1.6
Shipping Volume (m3): 1.65
Model: 75 HA 75 HX
Honing Operation: Autostroking / Manual Autostroking High Speed
Bore Diameter: 3 - 75 mm 6 - 50 mm
Bore Length: 150 mm 150 mm
Spindle Speed: 250 - 1000 RPM
(infinitely Variable)		 200 - 2000 RPM
(infinitely Variable)
Reciprocation Speed: 70, 100, 140, 180 strokes/min 70 - 400 strokes/min
(in 3 steps)
Drive Motor: 0.5 HP 1.0 HP
Reciprocation Motor: 0.5 HP 1.0 HP
Coolant Pump: 0.1 HP 0.1 HP
Coolant Tank Capacity: 50 Litres 45 Litres
Filtration: 3 Stage: Magnetic, Paper Filter and Gravity
Stone Expansion: Manually through feed wheel with indication on dial
Stone Pressure: Manually Adjustable Manually Adjustable
Process Timer: 0 - 6 minute auto reset timer Does not exist
Stroke Counter: Does not exist 1 - 9999 counts
Net / Gross Weight (kgs): 600 / 800 700 / 900
Overall Dimensions (m): 1.25 x 1.2 x 1.6 1.2 x 1.4 x 1.35
Shipping Volume (m3): 2.40 2.30

Operation: The honing Cycle is Automatic. The operator has to just load the job on the fixture, press the pedal and wait till the honing cycle is completed at the end of the predetermined time set on the timer (number of strokes set on the model 75 HX) OR achievement of the size as per the optionally available autoguaging system. During this automatic cycle, the honing tool rotates, the component reciprocates, honing stone expands, the component is honed to the required size, the honing stone collapses, reciprocation stops and the tool comes to rest.


Auto Stroking Machine Model: 75 HA

Standard Equipment:  Electric Motors, Coolant Pump, Machine Lamp
Optional Equipment: Special fixtures to hold components, Toolings / Mandrils for Honing, Honing Stones, Autoguaging system (for 75 HA and 75 HX models).

M&S Logo

Maneklal and Sons (Exports)
237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA
Tel: (+91 22) 22618951 / 22618962    Fax: (+91 22) 22618903
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

 Home   Top

TO OUR PAGE ON AUTOMOTIVE ENGINE REBUILDING MACHINES

Back   Next